Type I Plug Adaptors
Travelling from the UK? A type I adaptor will allow you to connect your UK (type G) plugs to a type I socket.
For Use in: Australia, New Zealand, Papua New Guinea and Argentina (2 Pin unearthed and 3 Pin earthed variants).
Compatibility
Compatible with: Type I sockets only.
See our full plug & socket compatibility table for further information.
Variants
- 10A 2 blade unearthed (compatible with 3 pin earthed sockets)
- 10A 3 blade earthed
- 15A 3 blade earthed
- 20A 3 blade earthed
The 15A and 20A plugs have progressively wider blade configurationss (10A - 6.35mm (all blades), 15A - 9.08mm (earth blade only), 20A - 9.08mm (all blades)). Lower power plugs will fit higher power sockets but not vice versa. The standard 10A plug adaptors used by British travellers will fit all of the sockets.
Other Adaptor Types
Planning a trip to Australia, New Zealand, Papua New Guinea or Argentina? Explore our type I power adaptors below. These Australian earthed plug adaptors are all compatible with UK type G plugs and will keep your devices powered and charged while you're abroad. Many include integral USB, USB-C and some have high power PD ports for laptop charging. Multiplug extension strips can also be a convenient way to connect several devices.
Countries Where Type I Plugs are Used
American Samoa, Argentina, Australia, Brazil, China, Cook Islands, East Timor, El Salvador, Fiji, Guatemala, Kiribati, Nauru, New Zealand, Papua New Guinea, Saint Vincent and The Grenadines, Samoa, Tonga and Uruguay.
Frequently Asked Questions
Type I Travel Adaptors
-
Primarily: Australia, New Zealand, Papua New Guinea and Argentina.
Full list: American Samoa, Argentina, Australia, Brazil, China, Cook Islands, East Timor, El Salvador, Fiji, Guatemala, Kiribati, Nauru, New Zealand, Papua New Guinea, Saint Vincent and The Grenadines, Samoa, Tonga, Uruguay. -
A type I travel adaptor will convert your British (type G) plugs to a 2 blade (unearthed) or 3 blade (earthed) configuration that will fit the type I sockets found in Australia, New Zealand, Papua New Guinea and Argentina. They do not convert the voltage or frequency of the electrical supply.
-
Yes, 2 blade Type I plugs (unearthed) can be safely used in 3 blade earthed sockets. Modern Type I sockets have tamper resistant shutters which are designed to stop foreign objects from being inserted into the live or neutral slots. A 2 blade plug however can still be used as the shutters open when the 2 flat blades of the plug press on them simultaneously.
-
Yes, many type I adaptors have integral USB, USB-C and sometimes PD ports. There are also dedicated type I USB charging hubs that have muliple ports, support QC 3.0 and 100 W+ PD ports can be found on some of the high end GaN models.
-
Yes, universal adaptors have a 2 blade (unearthed) type I plug, sometimes achieved by swivelling the blades of the type A plug. Earthed universal adaptors are available if required and these have a 3 blade type I plug, but they are less common.
-
No, type C uses round pins whereas type I uses flat blades arranged in a 'V'.
-
Here's a picture of a Type I plug adaptor.