Please be aware that whilst a travel adaptor will allow you to physically plug a UK 3 pin plug into a different socket it will not change the voltage or frequency of the supply.
Voltage - The mains voltage in Canada is 120 V which is incompatible with most UK appliances (UK voltage is currently specified as 230 V +10% / - 6%). Check any appliances that you wish to use carefully to see what voltage is specified. Items such as laptops will often specify "100 - 240V" either on the equipment or the power supply (if it has one). If not then you will need a transformer to operate your appliance.
Frequency - The frequency in Canada is 60 Hz which is slightly higher than in the UK (which operates at 50 Hz). In practical terms this makes little difference as most travel appliances will run at either frequency. Some items with motors, such as hairdryers and some clocks will run a little faster than intended but it is not likely to be problematic. Check your device - it may say 50/60 Hz which indicates that it is compatible with either frequency. If you are in doubt or have expensive equipment check with the manufacturer first as some equipment may be damaged by running on an incorrect frequency.Special considerations - Standardized at 120V. 240V single phase used for applications such as clothes driers, air conditioning, electric heating, water heaters, cookers and machinery. Buildings and houses with more than one branch circuit have both voltages. Three-phase 120/208 V or 347/600 V is available though primarily only to commercial or industrial buildings. Type A outlets are for repairs only (house from the 1950s or older), type B now required for new construction and renovation. A 20-Amp type B but with a T-slot is used in kitchens in new construction.
This will help us to show you adaptors that will work with your domestic devices.
Tip: If you are not located in the UK or USA just click on the picture that shows your domestic plug or socket / outlet type and we'll know what you need.
Alternatively if we do not support your specific plug / socket types yet you can close this and view the site with default settings.
You can change your preference at any time by clicking on the flag icons at the top of the page.