With USB + USB C (twin pack)

$28.99Details
The answer depends on which straighteners you have as some are dual voltage and others are not. If yours are dual voltage they will say something along the lines of "110/240V 50/60Hz" somewhere on the appliance. If they don't then you can safely assume that they were not made to operate on 230V.
Take them with you, they will be fine. All of the modern GHDs should be dual voltage. You will however need a travel adapter in order to plug them in and you have to be a little bit careful if you want to remain safe. There are two important points that you need to consider:
You can also get worldwide adapters in either grounded or ungrounded forms if you want a more flexible solution. Again you need to check that they can handle the required current before using one.
Not all are so you'll have to check. Most modern versions are now available as dual voltage though.
Europe uses 230V so you will need to check your straighteners. If they're dual voltage you will just need a travel adapter that is rated for the current that is needed. A rating of 5A or more is sufficient for most straighteners. If they are 120V only you should not try to use them as it would be dangerous and you may cause damage to the straigteners or result in a fire.
The UK uses 230V so you will need to check your straighteners. If they're dual voltage you will just need a travel adapter that is rated for the current that is needed. A rating of 5A or more is sufficient for most straighteners. If they are 100V - 120V only you should not try to plug them in directly as it would be dangerous and you may cause damage to the straigteners or result in a fire. You could take a transformer but they are bulky and heavy and often cost as much as a decent set of straighteners.
Yes, most hair straighteners can safely be taken in carry-on or checked bags. Cordless models that contain lithium ion batteries may only be taken in carry-on.







Prices and stock status
✅ checked live
This will help us to show you adaptors that will work with your domestic devices.


Tip: If you are not located in the UK or USA just click on the picture that shows your domestic plug or socket / outlet type and we'll know what you need.
Alternatively if we do not support your specific plug / socket types yet you can close this and view the site with default settings.
You can change your preference at any time by clicking on the flag icons at the top of the page.